Symbols on Pole in Profiler

Symbols on Pole in Profiler

You are here:
< Back

You may see symbols next to or above a pole in the Profile module. These symbols indicate equipment or other information about the pole that is not otherwise obvious.

SymbolMeaning
TThe tipload for this pole has been manually created/modified
SThere is a Stay on the pole
PThere is a Plant item on the pole
<>The ratio of spans on either side of the pole exceeds the ration set in Options, for at least one circuit
UUplift for this circuit exceeds the value set in Options (default is 0)

-->